Need the Mitsubishi M80 display in a different language? There are two ways — a settings-screen method and a parameter method — and both take under a minute. Screenshots below (demonstrated switching to Chinese, code 22; the same steps work for any language, including back to English).
Method 1 — via System setup
Step 1 — Press [MAINTE]
Press the [MAINTE] key to enter the Maintenance screen.
Step 2 — Open [System setup]
Step 3 — Set the display language
In the display-language field, enter the language code — 22 in this example (Chinese).
Language setting complete.
Method 2 — via parameter #1043
Step 1 — Press [MAINTE]
Step 2 — Press [Param]
Step 3 — Go to parameter #1043
Press [Param number], enter 1043 and press [Input].
Step 4 — Enter the language code
Enter 22 (Chinese in this example) and press [Input].
The display switches after the setting is applied:
The full language list — press [Help]
With parameter #1043 selected, press [Help] to see what each value means: the language codes run from 0 to 25 (English included). Pick your code, enter it, done.
Related
We repair and supply Mitsubishi M70/M80 control units, display units and drives — free diagnosis, warranty on everything.
📞 +91 8802212394 | ✉ jj.automation@outlook.com