Mitsubishi Remote I/O Unit FCU8-DX651 for M800S/ M80

The Mitsubishi FCU8-DX651 is a combined standard and safety remote I/O unit for M800S and M80 series CNC controls, adding safety relay outputs with contact welding detection over Remote I/O 2.0.

• DI: 32 points, 24 V / 0 V common type
• DO: 32 points, source type (200 mA per point)
• Safety DI: 8 points, 0 V common type
• Safety relay output: 4 points, non-voltage contact, with relay contact welding detection
• Number of occupied stations: 3
• Note: safety DI uses 16 terminal points because of duplication wiring
• Note: safety relay output uses 8 terminal points because of duplication wiring
• Supplied with: base card, add-on card, RIO 2.0 connector set
• Power supply: 24 VDC — current consumption 3.7 A, maximum heating value 8 W
• Mass: 0.8 kg — outline dimensions (W×H×D): 172 × 100 × 115 mm
• Ambient temperature: 0 to 58 °C operating, −20 to 60 °C storage
• Ambient humidity: 10 to 75 % RH long term, 10 to 85 % RH short term (no dew condensation)
• Vibration resistance 4.9 m/s² or less; shock resistance 29.4 m/s² or less
• Working atmosphere: no corrosive gases, dust or oil mist
• Altitude: operation / storage 1000 m or less; transportation 13000 m or less above sea level
• Up to 32 remote I/O units connectable, total occupied stations 64 or less
• Condition options: New / Used / Refurbished — tested before dispatch